What’s WOYO PDR-007 Paintless Dent Repair Heat Induction?

when you car body with dent, which tools can fixing this problem? is there a device which with the cleanest and fastest way for fixing hail or boulders dents, door dings and other minor soft dents? WOYO PDR-007 Paintless Dent Repair is for Paintless dent repair, do not damage the original pain.

Nandrepair Paintless Dent Repair Features:

Paintless dent repair, do not damage the original pain

Latest techniques, Magnetic induction system, Dent repair innovation

Simple and easy to operate, low cost of learning

Rapid repair, to the same depression area, 10 times faster than traditional repair method.

Fast shipping, Fast delivery to the owner, improve workshop utilization rate, rapid recovery of investment

The high precision control, 85% imported chip equipment components, quality guarantee, stable and secure

Large screen digital display, accurate control, real-time monitor

Saving labor, compared to the traditional repair way requiring 2 people, now only 1 people can operate the whole

Warning Before Operation:

1.Do not use this device in patients with pacemakers and various metal prostheses.

2.Before using the equipment, please wear a protective mask, protective gloves and overalls to prevent burns in operation.

3.Do not wear any metal items such as watches, necklaces, keys, belt buckles, coins, zippers, etc..

4.The equipment shall not be used in conductive dust, spray working area, chemical fuel working area, high temperature zone and high humidity area.

5.When the device is powered on, no combustible material can be placed next to it.

6.Before using the equipment, please have a fire extinguisher in case of improper operation.

7.Do not have to install airbags in the vicinity of the use of this tool.

8.If the device is connected to the power supply, it is necessary to guard the equipment. Unplug the AC power outlet when not in use.

9.Equipment storage, the temperature should be maintained at 0~50 ℃, when the mobile device to avoid vibration.

Porsche Piwis Tester II

Porsche Piwis Tester II with CF30 Laptop ( Life-time Chargeless Upgrade )
Porsche Piwis Tester II is the latest able tester, the a lot of poweful analyze and offline programming apparatus for Porsche, with latest tester for Porsche, able functions, abounding access.
Porsche Piwis Warm Tips:
Second-hand laptop CF30, 90%-95% new;
New software is continuously provided, accepted adaptation is V14.3500;
Requires ONLINE modules: (F BCM R BCM DME ELV SRS KEY).
Top 9 Reasons to Get Porsche Piwis Tester II:
1. Software Version: V14.350 ( Life-time Chargeless Upgrade )
2. Laptop: CF-30 (Second Hand)—Software is central the Hard Drive. No charge Installation
3. Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
4. Amend Method: By CD or HDD (One Year for Free, It can not be adapted online. 200USD for one time amend afterwards one year.)
5. Software contains operating arrangement win XP only. you just charge to admit into your computer and use it.
6. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
7. Porsche Piwis Tester II Software Chargeless Download (American Server)
8. PPN online account is available(key programming,etc),service amount is not included
9. Bluetooth,GPS and Navigation Function are available. But you charge to pay for the approval of them.
Porsche Piwis Tester 2 Functions:
1. Read/clear absurdity code, bolt abstracts stream, computer programming match, basal test, aliment advice consult, apparatus website drawing, base diagram.
2.Professional Diagnostic Tools  Porsche Piwis Tester II works with the old and latest Porsche cars. It is able with the Panasonic laptop and aboriginal software for the test. Porsche Piwis Tester II can advice you analyze and affairs the a lot of new and old affectionate of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can alone be diagnosed by application Porsche Piwis Tester II. Based on accepted activity planning, all beforehand car models will gradually be afflicted over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I accept to be acclimated for beforehand models in the Porsche branch until end of 2010.
4. Support for Porsche. Piwis Tester I will no best be accessible already the beforehand analytic programs accept been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will accommodate one basal section of software. This is all-important in adjustment to alpha and configure the tester.
Porsche Piwis II Support Systems:
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Aboriginal antitheft System,KEYLESS GO system, OBDII system.

BMW ICOM A2 With WIFI And Rheingold ISTA Enigneer Tool

From Autonumen.com BMW ICOM A2 is new generation BMW Scanner which instead of its previous version BMW ICOM A+B+C for diagnose and program BMW group vehicles . The unit includes the BMW ICOM A2+B+C (with WIFI function) and 500GB HDD contains latest Rheingold ISTA D/P and Engineer tools(INPA,E-SYS,ETK,NCS and so on.

1. Top Quality BMW diagnostic tool BMW ICOM A2+B+C With WIFI connection function.

2. With Latest 500 GB hard driver contains latest Rheingold ISTA D/P and Enigneer Tool.

3. The hard drive can be installed on 95% laptop with Intel CPU I3I5I7 and 4GB Ram.

4. Software version is 10.2015 ISTA-D (3.51.13) + ISTA-P (3.56.3.002) + Engineer Tool.

PLS NOTE:

No Network And Also No Connection With The Original Server When You Use The Rheingold BMW ICOM Software HDD, Otherwise It Is Will Be Damaged,And Need You Send Back For Repair.

The advantages of BMW ICOM A2+B+C ISID Diagnostic Tool

1.Faster processor and bigger storage for better expression.

2.Robust construction makes it can works in complicated environment.

3.The Part B of A2 will be covered by a soft gap, it is for avoiding dust & oil & water.

Porsche Piwis Tester II Diagnostic Tool -Next Generation of PIWIS Tester KTS520

Porsche Piwis Tester II is the latest inspect equipment of Porsche Company. This is the latest professional tester for Porshe, it is the Next Generation of PIWIS Tester KTS520. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars.

Lastest Version for Porsche Piwis Tester 2 is V16.20.This is Original Porsche Software , you can free to download from official website.

Porsche Piwis tester II works with the old and latest Porsche cars from 2005-2015. It is equipped with the CF30 laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.

Porsche Piwis Tester II Support Systems: Engine, automatic transmission, air-conditioning, SRS, ABS, ASR, MPL, GM, Original antitheft System, Keyless GO system, OBDII system.

The Functions of Porsche Piwis Tester II including:
Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.

Compare with PIWIS Tester KTS520, Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

Porsche Diagnostic Scanner is compatible to work with CF30 laptop. CF-30 is a Second Hand laptop which in good condition. If you order this item from www.autonumen.com , Software is inside the Hard Drive. Our engineer will test it well for send out the package to you. You can get it to work directly when you receive the package, No need Installation.

BMW ICOM Next VS. BMW ICOM A2,Which is Better?

From Autonumen.com BMW ICOM NEXT is the latest generation of BMW ICOM A2.Do you know what is the difference between and which to choose ? Bellow there are some specific information of ICOM A 2 and ICOM NEXT to help you tell the difference.
BMW ICOM NEXT BMW Diagnostic Tool ICOM NEXT A+B+C

Both ICOM A2 and ICOM Next A can work with the same software ISTA-D ISTA-P for the same BMW vehicles. But they are kind of different from some aspects, especially firmware adaption. Here is some highlights of ICOM NETX after hardware update with high-quality PCB:
more stable during programming
be necessary for the future Gbit cars
faster start-up times and high throughput
through high-performance, low-power ARM SoC
improved handling
more flexible OBD cable
lighted button for logs
More detail about ICOM NEXT BMW diagnostic tool,pls connect

Autel Maxisys MS908CV Description

The new Autel MaxiSys CV Heavy Duty Diagnostic is built on the powerful MaxiSys 908 platform and provides a comprehensive diagnostic solution for virtually all commercial vehicles as well as some popular models of industrial machines from North America, Europe and Asia.
Offering advanced features and extreme ease-of-use, Autel Scanner MaxiSys CV is the ideal solution for independent repair shops, owner-operators and various sized fleets seeking a single scan tool for all their professional heavy duty needs..

Need help setting up your new device? We provide online tech support, you can find us at anytime you need assistance with your Autel Maxisys MS908CV. We can offer either email, phone, or remote desktop support. .

Features
Hardware
MaxiFlash Elite VCI Module (J2534 ECU Programming Device):
1. Extraordinarily powerful Cortex-A9 quad-core processor
2. 9.7 Inch Multi Touch Capacitive Display with IPS technology. LED-backlit and Having 1024×768 res display for maximum viewing convenience.
3. Contains a large and fast 32GB Solid State Drive to maximize tablet speed performance, testing records storage, and data organization.
4. The VCI wirelessly connects to the main unit within a full 200 meter range.

Software
1. Android OS with easy touchscreen interface, simple navigation, powerful functions, multitasking convenience, and fast boot-up.
2.Complete capabilities for codes, live data, actuation tests, adaptations and ECU coding.
3.Displays live data in text, graph, analog and digital gauge for easy data review and analysis.
4.One-touch configuration of data, including graphs, performance triggers, recordings, and playback of results.
5.Records and playbacks live data to pinpoint troubles in sensors or components.
6.Cloud-based data manager saves customer and vehicle records, scanner data and technician notes so you can keep a complete repair history.

From Autonumen.com Autel Maxisys MS908CV Description:

1.POWERFUL DIAGNOSIS & ANALYSIS: The Autel Maxisys MS908CV is especially made for working on Heavy Duty vehicles. It contains a whole set of heavy duty vehicle connectors and provides access to all the commonly performed service functions: Oil Reset, EPB, Brake Bleeding, DPF & SCR, Immo & keys, Injector Throttle and other regular maintenance functions.
ADVANCED ECU CODING & PROGRAMMING: The complete MaxiSys MS908CV tool kit includes a compact sized MaxiFlash Elite which performs J2534 and J2534-2 pass-thru programming and provides Bluetooth VCI communication between the vehicle and the MaxiSys CV tablet.

2.AUTO SCAN & AUTO VIN: The Autel Tools MaxiSYS MS908 CV Diagnostics system features the latest VIN-based Auto VIN Scan function to identify CAN vehicles in just one touch, which allows the technician to quickly detect vehicle and scan all the diagnosable ECUs.

3.WIDE VEHICLE COVERAGE: Extensive vehicle coverage for more than 80 US, Asian and European commercial vehicles and industrial machine brands.

4.DISTINCTIVE FEATURES: The Customer Manager function allows you to create and edit customer accounts, helping you to save and organize all your customer and company vehicle information. And we provide online tech support, you can find us at anytime you need assistance with your Autel Maxisys

Autel MaxiSYS Elite No Communication Message

If the MaxiSys Display Tablet is not connected to the VCI device, an “Error” message displays. An “Error” message indicates the display tablet is not communicating with the Autel MaxiSYS Elite, and so cannot gain access to the vehicle control module. In this case, you need to do the following check-ups:

1.Check if the VCI device is powered on.
2.In case of wireless connection, check if the network is configured correctly, or if the right device has been paired.
3.If during the diagnosis process, the communication is suddenly interrupted due to the loss of signal, check if there is any object that causes signal interruption.
4.Check if the VCI device is properly positioned. It is recommended to put the VCI device with the front side up.
5.Try standing closer to the VCI device to obtain more stable signals, and faster communication speed.

6.In case of wired connection, check the cable connection between the display tablet and the VCI device.
7.Check if the green LED on the VCI device is illuminated for BT, Ethernet, or USB.
8.Check if the Error LED on the Autel Tools Autel Maxisys device is on, this may indicate there is a communication error between the devices, in this case try re-establishing the connection again; if this does not work, there may be a hardware problem with the device, in this case contact for technical support.

B If the VCI device is unable to establish a communication link, a prompt message displays with check instructions. The following conditions are the possible causes for this massage to display:

1.The Diagnostic Scanner VCI device is unable to establish a communication link with the vehicle.
2.You’ve selected a system for testing that the vehicle is not equipped Incorrect vehicle identification was entered.
3.There is a loose connection
4.There is a blown vehicle fuse.?
5.There is a wiring fault on the vehicle, or the data cable or adapter.
6.There is a circuit fault in the data cable or adapter.
7.Incorrect vehicle identification was entered

How to DIY MB Star Diagnosis

This is a post I read on the forum and find that it get lots of good comments, so I think there may be more people need and post on the blog for sharing.

I would help out a few Autonumen.com MB brothers with a couple star diagnostic tutorials…

Note: this is DAS/XENTRY Software with mb star diagnosis.
Free download: http://down.mbstarsgop.com/download/xentry.zip

First, Lowering the car.
Get to the 211 Section.

You will get to the main menu

Then go to Function performed by more than one control unit.

Then Chassis

Then Level adj

Then Suspension

And here is where people have problems, they just go to actuations and then lower it, IT WILL NOT STAY LOWERED this way, you have to go to initial startup

Then Initial with manual settings

Then F2

Here you will see a screen that shows the voltages which correspond to the height of the vehicle. they must be within the given ranges in the left hand column. use the + and – buttons to lower the car (In my screenshot I am in the car with a friend in the back seat, so that is why it is at 3.27, it should not exceed 3) Then hit F2

Enter in these inclination angles and if the car is within the voltages supplied in the page before, the car will accept the new lowered setting, if not it will reject it.

Now, how to activate the unlock and lock beep (honestly, one of the best mods to do if you have an older model e55)
First Control units

Then Body

Then rear SAM

Then Control unit adaptations

Then national version of ATA function

At this screen you will see a pull down menu with a list of different regions on it. The only ones you need to worry about are USA with buzzer and Netherlands. If you choose USA, i will give you three short quick beeps when you lock the car and one short when you unlock it. Netherlands will give you three longer beeps when you lock the car and one long when you unlock it. Personal preference on which one you like. Then hit F3

Then F3(YES)

Hope this helps out some people. I really did not find a good DIY for Star Diagnostics, so I thought I would help out!

Published on mb star diagnosis

Car Flash ECU Programmer From autonumen

Whether you’re a home car owner or an auto mechanic — you can save thousands of dollars on car maintenance, save time and effort on repairs, and dramatically improve your cars lifespan/performance — by getting yourself a professional car diagnostics scanner.
They’re called Auto Scanner Tools. And will give you an instant overview of your vehicles condition by tapping into it’s computer chip.

But more importantly, you can also obtain software that will allow you to edit the cars performance data. Like adjusting RPM, fuel injection, etc. This is what car performance shops charge thousands of dollar for — to allow the car to operate more fuel efficiently, faster or with stronger torque/BHP.
The good news is, you can do the same at fraction of a cost, with a USB connection interface to your laptop, and car ECU tuning software.

On vehicles, a list of flash updates that are available can be found on Vehicle PCM Calibration Information website at www.autonumen.com

The actual reprogramming procedure for a typical GM vehicle goes as follows:

1.Check the calibration history of the vehicle — Go to the web page at www.autonumen.com and see what latest program is for the vehicle using the vehicle’s VIN number. If the programming has been updated to correct a problem, it will be listed on the website
2.Connect your PC to the Tech 2 scan tool with a RS232 cable pass-through device.
3.Start the GM recalibration software program on your PC and enter the vehicle application information (year, make, model, etc.).
4.Connect the Tech 2 scan tool to the diagnostic connector on the vehicle (located under the dash near the steering column).
5.Switch the Tech 2 scan tool on and wait for the Start Screen.
6.Validate the vehicle VIN number.
7.Choose the operating system, engine, fuel system, speedometer or transmission.
8.Select “normal reprogramming” or “VCI” (special modifications).
9.Choose the update bulletin/recalibration number from the menu.
10.Start the transfer of data. The reprogramming procedure takes about three minutes, and can be done with the computer in or out of the vehicle. The PC screen will display a blue progress bar as the software is uploading to the vehicle.
NOTE: The GM setup won’t allow the same calibration to be reinstalled over itself. Only an updated calibration can be loaded into the vehicle computer.
11.When the software has finished loading, the message “PROGRAMMING COMPLETE” will appear.
12.The scan tool can now be disconnected from the vehicle (turn ignition off first), and any subsequent relearning procedures that may be needed such as the crankshaft position variation relearn procedure can now be performed to finish the update.

Autel MaxiSys Elite Diagnostic Tool Common problem solving methods

1. updating MaxiFlash Elite to firmware 3.21? My maxisys communicate with the MaxiFlash J2534 but Maxiflash elite cannot communicate with any cars!
To resolve this problem , go to www.auteltehc.com and go support and updates ,and live chat with the representative and they’ll help you to resolve the issue .

2. How to install Google play store in Autel maxisys elite
you can download Google chrome on elite. Just search Google chrome apk file and download and install it. After that you can access pro demand and identifix

3. I’m trying to program BMW car and I cannot. All the hardware are done
You still need to within your free update period , you need a good WIFI connection to your network and internet from your work area , and Autel’s server to access what programming and advanced coding that is available for the year , make, model, and module of the BMW. Kind of like a successful Cr@pshoot with Interstellar travel to an Earth like planet to align the CAS afterwards too.

4. I may be silly here but my maxisys elite has NO Ethernet port for BMW programming. I have looked all over the tablet. The only ports I have are 2 x usb, hdmi, otg, headphone and power?
1.Yes Autel has a separate adapter for it. You need to purchase it separately.
2. You can buy any Android compatible ethernet-USB adapter from any place. But you have to be sure that works with Android, because if the adapter is just for PC it will not work with the tablet.

5. how to programming the vehicle modules
Autel MaxiSys Elite / Autel MaxiSys Pro MS908P can only support to program BMW and Benz. You can refer to http://www.autel.com/u/cms/www/201501/282132017pvy.pdf

6. My Autel Scan Tool Maxisys Elite Multitask will not turn on.
you need to go to System Setting->App Switcher, please select it.

7. I cannot get my MaxiSys Elite to send reports or anything with the email option. It also do not want to print to my wireless HP Deskjet 4645 altough i pick it up. I have my Maxisys running from my iPad hotspot.
What’s your system version? Please go to Maxisys-Update to download all the latest system version and try again. Our current version can’t support to Wi-Fi printer, so you need to install Maxisys PC link in your PC to print the doc out.

8. I can’t find the vehicles that covereged by maxisys elite in the website
I need to buy this device but first I need to know the vehicles covered,
Plus, how much is for renewal for this device
Function list here: http://pro.auteltech.com/measurecar-1-1.html?m=4 and it’s USD1295 for renewal

9. I have problem with latest Benz update, installation bar goes up to 50% and give message installation error, there is no app Benz in uninstall section.
please check and see is there a benz folder under below path: “ES files EXPLORER—-scan—vehicle–Europe—–Benz”. If there is one, please delete it. Also delete it if you find one under “ES files EXPLORER—scan—download” and “Maxisys—data manager—Apps Uninstall”. Then restart Maxisys elite and re-load and install the Benz software.

10. How to program key for my car ?
Try the following:
IMMO -> 1.Immobilizer Setup -> Add and Delete Keys

11.Which is the activation code because I don’t have it please
Do you mean the register code? You can find it in Maxisys-About page.

12. how I can used e-mail sending by max?
There is an Email app pre-installed in Maxisys , marked in red below. You can set your email account step by step.

13. We just recieved our Maxisys Elite WQ8MAXISYSELITE, but when we try to register it, it says that the product does not exist.
As for your case, please register your device in our website as following steps:
1.Log in our website http://pro.auteltech.com/ with your ID and password.
2.Please click “Product Registration”. Select your product model, fill in the serial No. and register password to finish the registration. As for the serial No. and register password, you can Please touch “About” in the tool, and you will find them.
PS: Please select the right product model and fill in the right register password which can be checked in About page.

14. I am using Autel maxisys Elite, and the internal memory almost full. I bought a SD card (32GB), how can I do that new updates will be written into SD card not internal memory?
Our tool can’t accept external SD card to install vehicle software. It is suggested you format the SD card and download BMW, Benz, VW, which has big size first. Then you can download other vehicles.